BIM-GSS IMOD TCP/IP for VSE Browser Interface Form

TEST1:
TEST2:
TEST3:
TEST4:
TEST5:
note: In order to use this interface you must be running CSI's TCP/IP for VSE HTTP daemon, CSI's program. CGILOAD, in a partition, and the TCP/IP for VSE stack on the VSE machine you wish to have access to IMODs through. You must also add the following entry to the IPINITnn.L member: DEFINE CGI,PUBLIC='BIM$CGIP',TYPE=CGI-BAL You must also be running the BIM-GSS phase, BIM$CGRX, in a partition on the VSE machine. Please see the BIM-GSS 5.2D and 5.2B cover letters for more information. The following variables shown above must be used and are described as follows: IMOD - Name of the IMOD to be executed. For BIM-FAQS/ASO this must be BIMTCPFQ. For other uses the IMOD must contain up to 8 alphanumeric characters only. The default is BIMTCPIM. IPAD - The IP address and socket used to access the VSE machine. This value may be a name defined in your HOSTS file. The value for IPAD must agree with the one used in the ACTION statement. Be sure to not include any leading zeros for the individual numbers in the IP address. The default socket value is 80. The other variables are for demonstration only and can be changed as you wish. You must make sure that the IMOD and IPAD are the first two variables and should remain hidden.