BIM-FAQS-ASO TCP/IP for VSE BROWSER INTERFACE FORM

note: In order to use this interface you must be running CSI's TCP/IP for VSE HTTP daemon, CSI's program. CGILOAD, in a partition, and the TCP/IP for VSE stack on the VSE machine you wish to have access to BIM-FAQS/ASO through. You must also add the following entry to the IPINITnn.L member: DEFINE CGI,PUBLIC='BIM$CGIP',TYPE=CGI-BAL You must also be running the BIM-GSS phase, BIM$CGRX, in a partition on the VSE machine. Please see the BIM-GSS 5.2D and 5.2B cover letters for more information. The following variables shown above must be used and are described as follows: IMOD - Name of the IMOD to be executed. For BIM-FAQS/ASO this must be BIMTCPFQ. For other uses the IMOD must contain up to 8 alphanumeric characters only. The default is BIMTCPIM. IPAD - The IP address and socket used to access the VSE machine. This value may be a name defined in your HOSTS file. The value for IPAD must agree with the one used in the ACTION statement. Be sure to not include any leading zeros for the individual numbers in the IP address. The default socket value is 80. The other variables set up the intial settings for your BIM-FAQS/ASO session. You must make sure that the IMOD and IPAD are the first two variables and should remain hidden. The variables below may be HIDDEN or text input if you wish: US - BIM-FAQS/ASO userid to sign on as ID - The ID of the BIM_FAQS/ASO command processor to connect to, The default is none which signifies FAQSTXPC. This is for access to the multiple FAQSMAIN partition support available since release 5.1B. MD - Mod of the display to be used. Options are 1-20x80, 2-24x80, 3-32x80, and 4-43x80. The default value is 2. CM - Initial BIM-FAQS/ASO command to process.