********************************************************************************
 
// JOB CMSFIXES
// GOTO SKIP
 
Create the following file using XEDIT, with the name:
BF52402 ZAP A :
 
 
* APPLIES 52D ASO IUCV FIX
* ZAP LOADLIB BGSS52D
NAME FAQSIUXA IUCVFAQS
VER  14BE 47F0,96FE
REP  14BE 47F0,B268
VER  2268 B268,0000
REP  2268 950A,A013
VER  226C 0000,0000
REP  226C 4780,96FA
VER  2270 0000,0000
REP  2270 47F0,96FE
LOG BF52402 HANDLE WRONG VERSION
END
 
 
 
Use the following commands to apply:
 
 
1)  ZAP TXTLIB BGSS52D (NOPRINT INPUT BF52402
 
2)  GENFAQS
 
 
 
Run GENFAQS after checking to make sure the ZAP applied correctly (a
return code of zero on the terminal).  Once you have run GENFAQS, you
should have support for release 5.2B and below using the supplied FAQS
EXEC file.
 
----------------------------------------------------------------------
/. SKIP
/&
// JOB BF52410
/*
/* FIX PROBLEM WITH OVERLAY OF A REAL PAGE OF STORAGE DUE TO A
/* BAD LENGTH ON AN IUCV RECEIVE.  AN ATTEMPT IS MADE TO RECEIVE
/* DATA OVER A PAGE BOUNDARY.  SINCE THE RECEIVE MUST DEAL WITH
/* REAL PAGES, YOU CAN NOT EXCEED ONE PAGE (4K) BECAUSE THE NEXT
/* VIRTUAL PAGE IS NOT NECESSARILY IN THE NEXT CONSECUTIVE VIRTUAL
/* PAGE.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52410
 AFFECTS PHASE=FAQXIUCV
 ALTER 000074 41F0C260         : 41F02000
 AFFECTS PHASE=IUCVFAQS
 ALTER 000FD0 3FD0000000000000 : 49F03FE247D03FDC
 ALTER 000FD8 0000000000000000 : 48F03FE259F0C014
 ALTER 000FE0 00000000         : 07F51000
 ALTER 00073E 59F0C014         : 45503FD0
 RESOLVES 'REAL PAGE OVERLAY USING IUCV'
/*
/&
// JOB BF52411
/*
/* THIS PATCH CORRECTS PROBLEMS WITH THE ALL COMMAND INDICATING
/* THE SCAN DATA WAS NOT FOUND WHEN A FULL SCREEN OF RESULTS HAVE
/* NOT BEEN FOUND BEFORE THE THRESHOLD IS MET.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52411
 AFFECTS PHASE=FAQSPW67
 ALTER 0003A4 947F             : 945F
 ALTER 00084E 284E000000000000 : 41F081709180B10F
 ALTER 000856 0000000000000000 : 07859101B10B0785
 ALTER 00085E 0000000000000000 : D2072AA381A9D22E
 ALTER 000866 0000000000000000 : 70002A824170702F
 ALTER 00086E 0000000000000000 : 9620B11347F0842E
 ALTER 000876 0000000000000000 : 94DFB11347F0A714
 ALTER 00087E 0000000000000000 : 583064C89120B113
 ALTER 000886 0000000000000000 : 078594DFB133D203
 ALTER 00088E 000000000000     : B03CB14807F5
 ALTER 000A82 'CC FORM '       : '  *** TH'
 ALTER 000A8A ' DATE   '       : 'RESHOLD '
 ALTER 000A92 'DESTINAT'       : 'REACHED '
 ALTER 000A9A 'ION NODE'       : 'AT LINE:'
 ALTER 000AA2 '(USER)  '       : ' XXXXXXX'
 ALTER 000AAA 'TIME   U'       : 'X ***   '
 ALTER 000AB2 'SER INFO'       : '        '
 ALTER 000ABA '  ***END'       : '        '
 ALTER 000AC2 '-OF-QUEU'       : '        '
 ALTER 000ACA 'E***'           : '    '
 ALTER 001AF4 41F08170         : 4550284E
 ALTER 003240 4740A714         : 47402876
 ALTER 00327A 47F0A714         : 47F02876
 ALTER 0032AA 583064C8         : 4550287E
 AFFECTS PHASE=FAQSPW64
 ALTER 0003A4 947F             : 945F
 ALTER 00084E 284E000000000000 : 41F081709180B10F
 ALTER 000856 0000000000000000 : 07859101B10B0785
 ALTER 00085E 0000000000000000 : D2072AA381A9D22E
 ALTER 000866 0000000000000000 : 70002A824170702F
 ALTER 00086E 0000000000000000 : 9620B11347F0842E
 ALTER 000876 0000000000000000 : 94DFB11347F0A714
 ALTER 00087E 0000000000000000 : 583064C89120B113
 ALTER 000886 0000000000000000 : 078594DFB133D203
 ALTER 00088E 000000000000     : B03CB14807F5
 ALTER 000A82 'CC FORM '       : '  *** TH'
 ALTER 000A8A ' DATE   '       : 'RESHOLD '
 ALTER 000A92 'DESTINAT'       : 'REACHED '
 ALTER 000A9A 'ION NODE'       : 'AT LINE:'
 ALTER 000AA2 '(USER)  '       : ' XXXXXXX'
 ALTER 000AAA 'TIME   U'       : 'X ***   '
 ALTER 000AB2 'SER INFO'       : '        '
 ALTER 000ABA '  ***END'       : '        '
 ALTER 000AC2 '-OF-QUEU'       : '        '
 ALTER 000ACA 'E***'           : '    '
 ALTER 001AF4 41F08170         : 4550284E
 ALTER 003240 4740A714         : 47402876
 ALTER 00327A 47F0A714         : 47F02876
 ALTER 0032AA 583064C8         : 4550287E
 AFFECTS PHASE=FAQSPWR6
 ALTER 0003A4 947F             : 945F
 ALTER 00084E 284E000000000000 : 41F081709180B10F
 ALTER 000856 0000000000000000 : 07859101B10B0785
 ALTER 00085E 0000000000000000 : D2072AA381A9D22E
 ALTER 000866 0000000000000000 : 70002A824170702F
 ALTER 00086E 0000000000000000 : 9620B11347F0842E
 ALTER 000876 0000000000000000 : 94DFB11347F0A714
 ALTER 00087E 0000000000000000 : 583064C89120B113
 ALTER 000886 0000000000000000 : 078594DFB133D203
 ALTER 00088E 000000000000     : B03CB14807F5
 ALTER 000A82 'CC FORM '       : '  *** TH'
 ALTER 000A8A ' DATE   '       : 'RESHOLD '
 ALTER 000A92 'DESTINAT'       : 'REACHED '
 ALTER 000A9A 'ION NODE'       : 'AT LINE:'
 ALTER 000AA2 '(USER)  '       : ' XXXXXXX'
 ALTER 000AAA 'TIME   U'       : 'X ***   '
 ALTER 000AB2 'SER INFO'       : '        '
 ALTER 000ABA '  ***END'       : '        '
 ALTER 000AC2 '-OF-QUEU'       : '        '
 ALTER 000ACA 'E***'           : '    '
 ALTER 001AF4 41F08170         : 4550284E
 ALTER 0030A8 4740A714         : 47402876
 ALTER 0030E2 47F0A714         : 47F02876
 ALTER 003112 583064C8         : 4550287E
 RESOLVES 'SCAN NOT FOUND FOR ALL'
/*
/&
// JOB BF52412
/*
/* THIS PATCH FIXES A PROGRAM CHECK AND PENDING STATUS OF A USER
/* AS A RESULT OF ENTERING A LEFT OR RIGHT BRACKET ON THE BIM-FAQS/ASO
/* COMMAND LINE.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52412
 AFFECTS PHASE=FAQSMAIN
 ALTER 007354 201C000000000000 : 07E595F9E0000725
 ALTER 00735C 0000000000000000 : 47F020F047E0225A
 ALTER 007364 0000000000000000 : 95F930004720225A
 ALTER 00736C 0000             : 07F5
 ALTER 0073EA 47E0225A         : 45502028
 ALTER 00740E 471020F0         : 4550201C
 RESOLVES 'BRACKET USE RESULTS IN ABEND'
/*
/&
// JOB BF52413
/*
/* FIX PROBLEM WITH A HANG DURING A D F COMMAND BECAUSE OF A VERY
/* LARGE HARD COPY FILE CAUSING A LOCATION CHANGE THAT IS GREATER
/* THAN 999999 LINES.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52413
 AFFECTS PHASE=FAQXCONS
 ALTER 000AE8 C038C03AC03CC03E : 100F5900C04C47D0
 ALTER 000AF0 C040C042C044C046 : C0465800C04C9110
 ALTER 000AF8 C048C04AC04CC04E : 100607F5000F423F
 ALTER 006316 91101006         : 4550C038
 ALTER 006332 4EF0             : 4E00
 RESOLVES 'HANG USING D L OR D F COMMAND'
/*
/&
// JOB  BF52414
/* CATALOG BF052414.fix TO the VIO PDS
/*
/* This fix corrects problems with the BIM-FAQS/ASO library
/* member ZAP function.  This also enhances the feature to
/* include only the bytes that are most likely to be included
/* by the ZAP creator.  In the past, an entire 8 bytes would
/* be included if one byte was changed.  The problem fixed
/* deals with changes made to a member not being included in
/* the zap if the change was in the last 4 characters of a
/* line on the screen, and you are using the character entry
/* rather than the hex entry method.
/*
/*
/* This job only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052414.fix
MEM=FAQMENL4.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8986408699948184997E7D7D40A3888595408699948184997E83
81848499FF
D9C5D740F1FF
40404040408986408699948184997E7D7D40A3888595408496FF
40404040404040408699948184997E8381848499FF
404040404040404089864083818484996161F1F67EF1F240A38885954082848381937E
F1FF
4040404040859584FF
615BFF
E2C3C1D540C1D9C77E8496A981977AFF
E2C3C1D540C1D9C77EA983A37E508693F4A98884FF
D9C5D740F2F2FF
4040A983A37E508693F4A98884FF
4040849640A68889938540A983A36EF0FF
4040404040978199A28540A5819940508693F4A981974BA983A340938193A340938184
994093A2A399FF
4040404040978199A28540A581994093A2A3994093869994404B4093A396FF
4040404040938388877E8289A3A796994D938699946B93A3965D4F4F7DF0F0F0F0F0F0
F0F07DA7FF
4040404040869385957E93859587A3884D938699945D6CF4FF
404040404083889385957EF0FF
404040404083889796A27EF0FF
40404040408388818484997E83F2844DA7F2834D938184995D5DFF
4040404040849640938395A37EF040A3964086938595FF
4040404040404040898640A2A482A2A3994D938388876B938395A35CF44EF16BF45D7E
7DF0F0F0F0F0F0F0F07DA740A3888595408496FF
404040404040404040404089864083889385954C6EF040A3888595408496FF
404040404040404040404040404093A2A3997EA2A482A2A3994D938699946B83889796
A26B83889385955D4F4F7D407A407D4F4FA2A482A2A3994D93A3966B83889796A26B83
889385955DFF
4040404040404040404040404040938184997E99898788A34D83F2A74D84F2834D8388
818484995D5D6BF66B7DF07D5DFF
404040404040404040404040404093A2A3997E938193A34F4F7D407D4F4F938184994F
4F7D407D4F4F93A2A399FF
40404040404040404040404040408395A37E8395A34EF1FF
404040404040404040404040404050A74B8395A37E93A2A399FF
40404040404040404040404040408388818484997E8388818484994E83889385956CF2
FF
404040404040404040404040404083889385957EF0FF
4040404040404040404040859584FF
40404040404040404040408388818484997E8388818484994EF2FF
4040404040404040859584FF
40404040404040408593A285408496FF
404040404040404040404089864083889385957EF040A38885954083889796A27E9383
95A35CF44EF1FF
404040404040404040404083889385957E83889385954EF4FF
4040404040404040859584FF
404040404085958440938395A3FF
4040404040A983A37E508693F497A3994BA983A3FF
4040859584FF
615BFF
./ END
/*
/&
// JOB BF52415
/*
/* THIS PATCH FIXES A PROBLEM WITH INVALID PARAMETER WHEN USING
/* A D L, D F, OR D H COMMAND AFTER A CONSOLE DISPLAY.  THIS HAS
/* BEEN SEEN FROM THE CICS AND BROWSER INTERFACES, BUT CAN HAPPEN
/* WITH OTHER INTERFACES AS WELL.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52415
 AFFECTS PHASE=FAQSMAIN
 ALTER 000C00 8C00000000000000 : 478028649102C41E
 ALTER 000C08 000000000000     : 4770286407F5
 ALTER 003804 47802864         : 45508C00
 RESOLVES 'INVALID PARM WITH D L/D F/D H'
/*
/&
// JOB BF52416
/*
/* THIS PATCH FIXES A PROGRAM WITH DATE SELECTION FOR HARD COPY FILE
/* REPORTING NOT PROPERLY HANDLING LEAP YEAR WHEN RELATIVE DATE
/* SELECTION RESULTS IN BACKING UP TO THE PREVIOUS YEAR, AND THAT
/* YEAR IS A LEAP YEAR.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52416
 AFFECTS PHASE=GSFAQSHC
 ALTER 004F7C F811BF8E7E48     : FA11C0417E48
 RESOLVES 'BAD DATE SELECT ON LEAP YEAR'
/*
/&
// JOB  BF52417
/* CATALOG BF052417.fix TO the VIO PDS
/*
/* This fix corrects problems with preventing IMODS that begin
/* with pound sign (#) from being printed using the 'P' command
/* from the BIM-FAQS/ASO REXX IMOD File Directory List panel.
/*
/*
/* This job only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052417.fix
MEM=FAOMENUR.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E898640837E7E7DD77D40A3888595408496FF
E2C3C1D540C1D9C77E8184849985A2A240A3A49784407D4BD77EC6C1D8D4C5D5E4F040
D74B7D4F4F50979996874050A3A897854050A39987FF
D9C5D740F1FF
40404040404040408184849985A2A240A3A49784407D4BD77EC6C1D8D4C5D5E4F040D7
4B7D4F4F50979996874050A3A897854F4F7D405C407B7D4F4F50A39987FF
615BFF
MEM=FAOPRINT.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E978199A28540A581994050C3D4C44050979996874050A3A89785
4050A39987407D7B7D4050A39987F2FF
C9D5E240F1FF
40404040404089864050A399877E7D5C7D40A38885954050A399877E50A39987F2FF
615BFF
./ END
/*
/&
// JOB BF52418
/*
/* THIS PATCH FIXES A PROBLEM WITH FAQSAO INITIALIZATION NOT PASSING
/* ARG DATA CORRECTLY RESULTING IN THE ASOENV() FUNCTION NOT RETURNING
/* THE FIRST ARGUMENT IN THE DATA AREA AS IT SHOULD.
/*
/* THE FIRST ARGUMENT ENDS AT THE FIRST BLANK IN THE "DATA" DEFINED
/* FOR EACH IMOD SPECIFIED IN THE REXX IMOD INITIALIZATION AND
/* TAILORING PANEL.  THIS FIRST ELEMENT IN THE DATA SHOULD BE PART OF
/* THE ASOENV() DATA, BUT NOT PART OF THE ARGUMENT PASSED TO THE
/* IMOD, ITSELF.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52418
 AFFECTS PHASE=FAOXUFN
 ALTER 001308 4470B33A41707032 : 06704470B33A0700
 ALTER 00133E 6008             : 6009
 RESOLVES 'IMOD ARG PASSED INCORRECTLY'
/*
/&
// JOB  BF52419
/* CATALOG BF052419.fix TO the VIO PDS
/*
/* This fix solves a problem with multiple commands being issued
/* as a complex command when a GSFAQS message action entry is
/* triggered resulting in the commands not all being processed
/* due to checking the wrong return code value.
/*
/*
/* This job only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052419.fix
MEM=AOCMD.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E82A499977EF1FF
C9D5E240F1FF
40404082A4A2A87EF3F0F1F9F9F1F9F3F64040615C4099837EF86B4099A27EF1F84060
4094878399854082A4A2A8405C61FF
615BFF
E2C3C1D540C1D9C77EA281A8407D99837E7D409983FF
D9C5D740F1FF
404040404040404040615C40A281A8407D99837E7D409983405C61FF
615BFF
E2C3C1D540C1D9C77E8593A2854089864099835F7EF840A388859540849695857E9983
FF
D9C5D740F1FF
4040404040404040404040408593A2854089864099834C6E82A4A2A840A38885954084
9695857E9983FF
615BFF
./ END
/*
/&
// JOB BF52420
/*
/* THIS PATCH FIXES A PROBLEM WITH BIM-FAQS/ASO ON-LINE SESSIONS
/* LOOPING DUE TO A BAD AID VALUE BEING PASSED TO SDF PANELS WHEN
/* THE SESSION CLEAN UP IS BEING PERFORMED.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52420
 AFFECTS PHASE=FAQSMAIN
 ALTER 00032C 9604C422         : 45508C0E
 ALTER 00046E 9560C1F8         : 45508C1C
 ALTER 0004B6 5810C374         : 45508C2A
 ALTER 000C0E 0000000000000000 : 9604C4229180C0CD
 ALTER 000C16 0000000000000000 : 477084CE07F59180
 ALTER 000C1E 0000000000000000 : C0CD477084769560
 ALTER 000C26 0000000000000000 : C1F807F55810C374
 ALTER 000C2E 0000000000000000 : 9180C0CD078592F3
 ALTER 000C36 00000000         : 100007F5
 ALTER 00D3DE 926D1000         : 47F0C1D4
 ALTER 00D3E2 9108C25A         : 07000700
 ALTER 00D3E6 4770C1D4         : 07000700
 ALTER 00D3EA 92F31000         : 07000700
 ALTER 00D3EE 47F0C1D4         : 07000700
 RESOLVES 'LOOP ON SESSION CLEAN UP'
/*
/&
// JOB  BF52421
/* CATALOG BF052421.fix TO the VIO PDS
/*
/* This fix changes IMODS in order to properly support the
/* requests issued by ADDRESS CONSOLE, SYSTEM, and POWER.  Since
/* code was fixed in a previous release that related to hangs
/* when using the WAIT() function, commands sent from FAQSAO to
/* AR via IMODS have not always succeeded.  The IMOD changes are
/* to change $CONSOLE and other IMODS to try 10 times before
/* returning with an "ASYNOC BUSY" return code.  The changes also
/* involve BG52419, which changes the console busy return code to
/* be the same as that in previous VSE releases.  This allows IMODS
/* using these ADDRESS environments to work for all releases of VSE.
/*
/* If you have created your own IMODS, you should change their
/* functionality to agree with the $CONSOLE sample IMOD, while
/* changing the ADDRESS CONSOLE to the ADDRESS environment you are
/* using (CONSOLE, SYSTEM, or POWER).  An example is provided in
/* the comments for the BG52419 fix.
/*
/*
/* Step 1:  Catalog the IMOD changes to the VIO PDS file.
/*
/* This job step only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052421.fix
MEM=$ADDRESS.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240C3D6D5E2D6D3C54083969494819584FF
D9C5D740F1FF
849695857EF0FF
849640F1F040A495A389934084969585FF
4040408184849985A2A240C3D6D5E2D6D3C54083969494819584FF
40404089864099837EF440A388859540A97EA68189A34D7DF17D5DFF
4040408593A28540849695857EF1FF
859584FF
898640849695857EF040A38885954099837EF8FF
615BFF
MEM=$CICSREP.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E898640977E7DC4C6C8E2C9D77D40A3888595408184849985A2A2
40839695A2969385407DD4E2C77D40978984FF
D9C5D740F2FF
404040404040404040898640977E7DC4C6C8E2C9D77D40A38885954083819393405B83
9695A2969385407DD4E2C77D40978984FF
4040404040404040408593A2854083819393405B839695A2969385407D61A3837DFF
40404040404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A29693854099859793408481A381FF
D9C5D740F1FF
40404040404083819393405B839695A29693854099859793408481A381FF
40404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A29693854099859793FF
D9C5D740F1FF
4040404040404040404040404040404040404083819393405B839695A2969385409985
9793FF
4040404040404040404040404040404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A296938540868198839484407DD9C5
D7D3E87D40978984408481A381FF
D9C5D740F1FF
40404040404040404083819393405B839695A296938540868198839484407DD9C5D7D3
E87D40978984408481A381FF
40404040404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A29693854099859793408481A381FF
D9C5D740F1FF
40404040404040404083819393405B839695A29693854099859793408481A381FF
40404040404040404099837E9985A2A493A3FF
615BFF
MEM=$CMSREP.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240C3D6D5E2D6D3C54083969494819584FF
D9C5D740F1FF
83819393405B839695A29693854083969494819584FF
99837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E89864099835F7EF840A388859540A94B7E83974D7DA294A2877D
40A4A28599407DC1E2D6405BD3D6C7404C7D4086A4A28599407DC1A2A895FF
D9C5D740F1FF
404040404089864099837EF840A388859540A94B7E83974D7DA294A2877D40A4A28599
407DC1E2D6405BD3D6C7404C7D4086A4A28599407DC1A2A89596834082A4A2A87D5DFF
615BFF
MEM=$CONSOLE.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240C3D6D5E2D6D3C54083969494819584FF
D9C5D740F1FF
404040849695857EF0FF
404040849640F1F040A495A389934084969585FF
4040404040408184849985A2A240C3D6D5E2D6D3C54083969494819584FF
40404040404089864099837EF440A388859540A97EA68189A34D7DF17D5DFF
4040404040408593A28540849695857EF1FF
404040859584FF
404040898640849695857EF040A38885954099837EF8FF
615BFF
E2C3C1D540C1D9C77E89864099835F7EF840A388859540A281A8407DC1A2A895968340
82A4A2A87DFF
D9C5D740F1FF
40404040404040404089864099837EF840A388859540A281A8407DC1A2A89596834082
A4A2A87DFF
615BFF
E2C3C1D540C1D9C77E8593A28540A281A8407DD596408396949481958440979996A589
8485847DFF
E2C3C1D540C1D9C77E85A789A3FF
D9C5D740F1FF
85A789A3409983FF
615BFF
MEM=$JOBNREP.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77EC1C4C4D9C5E2E240C3D6D5E2D6D3C540868198839484407DD9C5
D7D3E87D4097898440998597FF
D9C5D740F1FF
40404040404083819393405B839695A296938540868198839484407DD9C5D7D3E87D40
97898440998597FF
40404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8593A28540C1C4C4D9C5E2E240C3D6D5E2D6D3C540A740998597
FF
D9C5D740F1FF
4040408593A285408496FF
40404040404083819393405B839695A296938540A740998597FF
40404040404099837E9985A2A493A3FF
404040859584FF
615BFF
MEM=$PA.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240839695A2969385404097839484FF
D9C5D740F1FF
404040404040404040404040404083819393405B839695A2969385404097839484FF
404040404040404040404040404099837E9985A2A493A3FF
615BFF
MEM=$REPLY.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77EC1C4C4D9C5E2E240C3D6D5E2D6D3C540868198839484407DD9C5
D7D3E87D4097898440998597FF
D9C5D740F1FF
404040404040404040404083819393405B839695A296938540868198839484407DD9C5
D7D3E87D4097898440998597FF
404040404040404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A296938540A740998597FF
D9C5D740F1FF
4040404040404040404040404040404083819393405B839695A296938540A740998597
FF
4040404040404040404040404040404099837E9985A2A493A3FF
615BFF
MEM=$SYSOUT.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240839695A296938540868198839484407DE27D
FF
D9C5D740F1FF
404040404040404040404040404083819393405B839695A29693854086819883948440
7DE27DFF
404040404040404040404040404099837E9985A2A493A3FF
615BFF
MEM=$WHEN.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8986408496958540A3888595408496FF
D9C5D740F1F2FF
83A3A8977EF1FF
8986408496958540A3888595408496FF
404040898640A69699844D8394846BF15D7EA69699844D839694948195846BF15D40A3
8885954083A3A8977EF0FF
859584FF
8593A28540839694948195847E7D5C407D4F4F83969494819584FF
40FF
40615C40A4A285408184849985A2A240A2A8A2A3859440A3964081939396A64099A495
9589958740819596A388859940C9D4D6C440898640A38885FF
40404040839694948195844089A2409596A340A38889A240C9D4D6C440404040404040
404040404040404040404040404040404040404040404040405C61FF
849695857EF0FF
849640F1F040A495A389934084969585FF
40404089864083A3A8977EF040A3888595408184849985A2A240C3D6D5E2D6D3C54083
969494819584FF
4040408593A285408184849985A2A240E2E8E24083969494819584FF
40404089864099837EF440A388859540A97EA68189A34D7DF17D5DFF
4040408593A28540849695857EF1FF
859584FF
898640849695857EF040A38885954099837EF8FF
40FF
89864099834C6EF040A3888595408496FF
40404089864099837EF840A388859540A281A8407D5BE6C8C5D5408599999699406040
C1A2A89596834082A4A2A87DFF
4040408593A28540A281A8407DC184849985A2A240C39695A296938540868189938584
4099837E7D4F4F9983FF
859584FF
615BFF
MEM=AOCMD.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E82A499977EF1FF
E2C3C1D540C1D9C77E82A4A2A87EF3F0F1F9F9F1F9F3F6FF
D9C5D740F1FF
40404082A4A2A87EF4FF
615BFF
MEM=AOLIST.OAL PDS=MON REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8184849985A2A240839695A296938540868198839484407DD4E2
C77DFF
D9C5D740F1FF
40404040404083819393408785A3839695A240868198839484407DD4E2C77DFF
40404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E8184849985A2A240839695A296938540868198839484407DD7C6
7DFF
D9C5D740F1FF
40404040404083819393408785A3839695A240868198839484407DD7C67DFF
40404040404099837E9985A2A493A3FF
615BFF
E2C3C1D540C1D9C77E85A789A3FF
D9C5D740F1FF
85A789A3FF
40FF
8785A3839695A27A40979996838584A49985FF
408199874083969494819584FF
40849695857EF0FF
40849640F1F040A495A389934084969585FF
404040408184849985A2A240C3D6D5E2D6D3C540839694948195844040404040404040
404040615C4089A2A2A48540839694948195844040404040404040404040404040405C
61FF
4040404089864099837EF440A388859540A97EA68189A34D7DF17D5DFF
404040408593A28540849695857EF1FF
40859584FF
408986405F8496958540A38885954099837EF8FF
4089864099835F7EF040A3888595408496FF
4040404089864099837EF840A388859540A281A8407DC6C1D8E2D3C9E2E34085999996
99406040C1A2A89596834082A4A2A87DFF
404040408593A28540A281A8407DC184849985A2A240C39695A2969385408681899385
844099837E7D4F4F9983FF
40859584FF
9985A3A49995409983FF
615BFF
./ END
/*
/*
/* Step 2:  Apply the BF52421 patch
/*
/*
/* THIS PATCH CHANGES THE ADDRESS CONSOLE/SYSTEM/POWER ENVIRONMENTS
/* TO RETURN THE PROPER RETURN CODE, SO IT AGREES WITH THE SVC 30
/* FROM EARLIER VERSIONS OF VSE.  BE SURE THAT BG52419 HAS ALSO BEEN
/* APPLIED.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52421
 AFFECTS PHASE=FAQSAO
 ALTER 001CEE 47803D9E : 47803DA6
 RESOLVES 'CHANGE RC FOR ADDRESS CONSOLE'
/*
/&
// JOB  BF52422
/* CATALOG BF052422.fix TO the VIO PDS
/*
/* This fix corrects a problem in the ASO SET command that kept
/* continuation lines from being handled properly due to spacing
/* up to column 16 being stripped.
/*
/*
/* This job only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052422.fix
MEM=FAQMENCM.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8698838394847EA2A39989974DA3998195A29381A3854D508698
838481A3F15D5D4F4FA2A39989974DA3998195A29381A3854D508698838481A3F25D5D
FF
D9C5D740F1FF
40408698838394847EA2A39989974DA3998195A29381A3854D508698838481A3F14F4F
508698838481A3F25D5DFF
615BFF
./ END
/*
/&
// JOB BF52423
/*
/* THIS PATCH FIXES A PROBLEM WITH EASY SCAN HANGING WHEN THE
/* OPTIONAL PATCH, BF52496 IS APPLIED TO RESTRICT ON-LINE HARD COPY
/* FILE ACCESS TO THE CACHE ONLY.  BY DOING THIS, EASY SCAN WILL
/* CONTINUE TO SEARCH FOR THE TOP OF FILE, WHICH IT WILL NEVER FIND
/* BECAUSE THE PATCH PREVENTS THE ACTUAL FILE FROM BEING ACCESSED.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52423
 AFFECTS PHASE=FAQXCONS
 ALTER 000B00 C050C052C054C056 : 960495E647F09240
 ALTER 000B08 C058C05AC05CC05E : 962095E6910495E6
 ALTER 000B10 C060C062C064C066 : 07859640A8F607F5
 ALTER 000B18 C068C06AC06CC06E : 94FB95E658909604
 ALTER 000B20 C070             : 07FE
 ALTER 00579C 9240             : C050
 ALTER 0058FA 962095E6         : 4550C058
 ALTER 00598E 58909604         : 47F0C068
 RESOLVES 'EASY SCAN HANGS WITH BF52496'
/*
/&
// JOB BF52424
/*
/* THIS PATCH CORRECTS A PROBLEM WITH BF52420 WITH A BAD DISPLACEMENT
/* IN A BRANCH THAT RESULTS IN A GFX204E ERROR TO USUALLY AN ADDRESS
/* OUTSIDE OF THE PARTITION AREA.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52424
 REQUIRES PRE=BF52420
 AFFECTS PHASE=FAQSMAIN
 ALTER 000C16 477084CE : 477084D8
 RESOLVES 'PRG CHK WITH BF52420 APPLIED'
/*
/&
// JOB  BF52425
/* CATALOG BF052425.fix TO the VIO PDS
/*
/* This fix corrects a problem with the other vendor commands not
/* passing command and parameter data, resulting in always
/* displaying the Other Vendor Menu instead of the requested
/* command.
/*
/*
/* This job only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052425.fix
MEM=FAQMENOV.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E8986408394847E7D7D40A3888595408394847E9697FF
C9D5E240F1FF
40408593A285408394847E96974F4F7D407D4F4F839484FF
615BFF
E2C3C1D540C1D9C77E978199A28540A49797859940A581994050C3D4C4408394844084
81A381FF
E2C3C1D540C1D9C77E50C3D4C47E7D7DFF
C9D5E240F2FF
4040404089864093859587A3884D8394845D7EF140A38885954096977E839484FF
404040408593A285408496FF
615BFF
E2C3C1D540C1D9C77E96A3888599A689A28540959697FF
E2C3C1D540C1D9C77E859584FF
C9D5E240F1FF
40404040404040859584FF
615BFF
./ END
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52425
 AFFECTS PHASE=FAQSMAIN
 ALTER 003024 2024 : D77E
 ALTER 003D6E D209 : D20A
 ALTER 003E16 615C : 2024
 ALTER 00415C D77E : 4B40
 RESOLVES 'OTHER VENDOR CALL PARM ERRORS'
/*
/&
 
// JOB BF52427
/*
/* THIS PATCH FIXES PROBLEMS WITH IMODS HANGING WHEN ANY OF THE
/* FUNCTIONS (IMOD, MESSAGE, MSG, SESSION, CLUSTER, LISTCAT, VSAM,
/* VSSPACE, AND LIBR) ARE BUSY WHEN AN IMOD TRIES TO ACCESS THEM.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52427
 AFFECTS PHASE=FAOXSFN
 ALTER 000850 A850A852A854A856 : 505D00104110BFF4
 ALTER 000858 A858A85AA85CA85E : 41301014D2131000
 ALTER 000860 A860A862A864A866 : 30005010A72841F0
 ALTER 000868 A868A86AA86CA86E : 00054110A7545010
 ALTER 000870 A870A872A874A876 : 3000411010044130
 ALTER 000878 A878A87AA87CA87E : 300446F0A86E07FE
 ALTER 00224A 505D0010         : 45E0A850
 RESOLVES 'HANGS IN IMODS USING FUNCTIONS'
/*
/&
// JOB BF52428
/*
/* THIS PATCH FIXES A POSSIBLE PROBLEM WITH THE ON-LINE LIBR
/* LIBLIST FUNCTION WHEN AN UNUSUAL ENTRY IS FOUND IN THE
/* LDT.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52428
 AFFECTS PHASE=FAOXSFN
 ALTER 00C3EE 95D730074780 : 95C330074770
 RESOLVES 'ERROR DURING FAQS LIBLIST'
/*
/&
// JOB BF52429
/*
/* THIS PATCH FIXES A PROBLEM WITH TIMESTAMPS FOR CONSOLE
/* MESSAGES BEING INCORRECT.  THIS WILL BE MORE EVIDENT ON
/* VSE/ESA 1.4 SYSTEMS, SINCE FAQS STILL INSERTS THE TIME STAMPS
/* ON THE CONSOLE MESSAGES.  THIS PATCH WILL ALSO REDUCE OVERHEAD
/* FOR EVERY CONSOLE MESSAGE.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52429
 AFFECTS PHASE=GSFAQS
 ALTER 00AFD8 41F0F001         : 5AF08FC4
 ALTER 00AFE0 59F0915047408DF4 : 1FEE5DE0915018FE
 ALTER 00AFE8 5BF0915047B08DE0 : 47F08DF407000700
 RESOLVES 'MESSAGE TIMESTAMPS IN ERROR'
/*
/&
// JOB  BF52430
/* CATALOG BF052430.fix TO the VIO PDS
/*
/* This fix provides support for ECKD devices that use cylinders
/* instead of tracks for VSAM SPACE designations.  This also fixes
/* a problem with not displaying all of the VSAM data sets in an
/* area of space due to a table overflow.
/*
/*
/* Step 1:  Catalog the IMOD changes to the VIO PDS file.
/*
/* This job step only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052430.fix
MEM=FAQMENV3.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E849640A583A37EF140A3964050A5A2944BF0FF
D9C5D740F1FF
4040404082A3A8977EF0FF
40404040849640A583A37EF140A3964050A5A2944BF0FF
615BFF
E2C3C1D540C1D9C77E8986409796A24D7DE5D6D3E4D4C540607D6B84938995855D6EF0
40A3888595408496FF
E2C3C1D540C1D9C77E859584FF
C9D5E240F2F0FF
404040404040408986409796A24D7DC4C5E5E3E8D7C5607D6B84938995855D6EF040A3
888595408496FF
40404040404040404040829796A27E9796A24D7DC4C5E5E3E8D7C560C27D6B84938995
855DFF
40404040404040404040898640829796A26EF140A3888595408496FF
4040404040404040404040404050A5A2944BA583A37E96A585999381A84D7D6060C2C9
C77D6B84938995856B829796A24EF86BF55DFF
4040404040404040404040404082A3A8977EF1FF
40404040404040404040859584FF
404040404040404040408593A2854082A3A8977EF0FF
40404040404040859584FF
4040404040404089864082A3A89740A3888595408496FF
404040404040404040408684A3A8977E938586A34D84938995856BF1F05DFF
404040404040404040408986408684A3A8977E7D4040E3D9C1C3D2E260E37D40A38885
95FF
4040404040404040404040404050A5A2944BA583A37E7D4040C3E8D3E260E3D6E36060
607D4F4FA2A482A2A3994D84938995856BF1F45DFF
404040404040404040408986408684A3A8977E7D4040E3D9C1C3D2E260E47D40A38885
95408496FF
404040404040404040404040408684A39992A27EA2A482A2A3994D84938995856BF1F5
6BF65D4EF0FF
40404040404040404040404040868483A893A27E8684A39992A26CF1F5FF
404040404040404040404040408986408684A39992A24C6E868483A893A25CF1F540A3
88859540868483A893A27E868483A893A24EF1FF
40404040404040404040404040868483A893A27E99898788A34D868483A893A26BF66B
7DF07D5DFF
4040404040404040404040404050A5A2944BA583A37E7D4040C3E8D3E260E4E2C5C460
60607D4F4F868483A893A24F4FA2A482A2A3994D84938995856BF2F15DFF
40404040404040404040859584FF
40404040404040859584FF
615BFF
E2C3C1D540C1D9C77EA6888595408684A3A8977E7DE3D9C1C3D2E260E37D404F408684
A3A8977E7DE3D9C1C3D2E260E47D40A388859540849381A3A37E7D5B7DFF
C9D5E240F1FF
4040404040A6888595408684A3A8977E7DC3E8D3E260E3D6E37D404F408684A3A8977E
7DC3E8D3E260E4E2C57D40A388859540849381A3A37E7D5B7DFF
615BFF
./ END
/*
/*
/* Step 2:  Apply the PHASE portion of the BF52430 patch
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52430
 AFFECTS PHASE=FAOXSFN
 ALTER 00A0DE C026C028C02AC02C : 4780CAE85840DD98
 ALTER 00A0E6 C02E             : 07F5
 ALTER 00A0E8 C030C032C034C036 : D201C05AB7520785
 ALTER 00A0F0 C038C03AC03CC03E : D201DDA6406F9180
 ALTER 00A0F8 C040C042C044C046 : 40764780C33AD201
 ALTER 00A100 C048C04AC04CC04E : C05ADDA6D201DDA6
 ALTER 00A108 C050C052C054C056 : B75292C2D39D47F0
 ALTER 00A110 C058C05A         : C33A0000
 ALTER 00A114 C05CC05EC060C062 : BF73800218674C70
 ALTER 00A11C C064C066         : C05A07F5
 ALTER 00A120 C068C06AC06CC06E : 4780C86C4E60D100
 ALTER 00A128 C070             : 07F5
 ALTER 00A12A C072C074C076C078 : BF3380004C30C05A
 ALTER 00A132 C07AC07CC07E     : BE37DDAA07F5
 ALTER 00A3E4 4770C33A         : 4550C030
 ALTER 00A45E D201DDA6406F     : 070007000700
 ALTER 00A65A DD18             : DDB0
 ALTER 00A660 DD64             : DEB0
 ALTER 00A8F0 BF738002         : 4550C05C
 ALTER 00A90E 4780C86C         : 4550C068
 ALTER 00A99C D201DDAA8000     : 1F334550C072
 ALTER 00A9CC DD18             : DDB0
 ALTER 00A9C0 BF33DDAA         : BF37DDAA
 ALTER 00A9F2 4220DDAC         : 4220DDAD
 ALTER 00A9FA 9500DDAC         : 9500DDAD
 ALTER 00AA0E 9501DDAC         : 9501DDAD
 ALTER 00AA22 9502DDAC         : 9502DDAD
 ALTER 00AA36 9503DDAC         : 9503DDAD
 ALTER 00AA4A 9504DDAC         : 9504DDAD
 ALTER 00AA5E 9505DDAC         : 9505DDAD
 ALTER 00AA72 9506DDAC         : 9506DDAD
 ALTER 00AB4E BF03DDAA         : BF07DDAA
 ALTER 00AB56 4000DDAA         : BE07DDAA
 ALTER 00AB90 4780CAE8         : 4550C026
 ALTER 00B878 0051             : 0041
 RESOLVES 'PROBLEMS WITH BIG 3390S'
/*
/&
// JOB BF52431
/*
/* THIS PATCH ALLOWS FPS TO HANDLE UP TO 23 DYNAMIC CLASSES WITHOUT
/* RESULTING IN A HARD WAIT.  THIS PATCH NEEDED TO RESTRICT THE
/* NUMBER OF DYNAMIC PARTITIONS PER CLASS THAT CAN BE SUPPORTED BY
/* FPS TO 9 (X1 - X9) FOR ALL DYNAMIC CLASSES.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52431
 AFFECTS PHASE=GSFPS01
 ALTER 000360 D21E             : D208
 ALTER 000366 D21E             : D208
 ALTER 000622 41A002EC         : 41A000DB
 ALTER 000654 41100020         : 41100009
 ALTER 000C5A 0020             : 0009
 AFFECTS PHASE=$FPSSVA
 ALTER 000A76 4780BA924720BA8E : 4780BA4C4720BA4C
 ALTER 000A88 06F041FF0009     : 47F0BA4C0700
 ALTER 000AA0 0020             : 0009
 RESOLVES 'HARD WAIT USING FPS > 10 CLS'
/*
/&
// JOB BF52432
/*
/* THIS PATCH FIXES A PROBLEM WITH THE IUCV INTERFACE THAT RESULTS
/* IN AN IUCV REJECT BEING ISSUED TO WHATEVER RESOURCE OCCUPIES THE
/* IUCV ID OF ZERO.  IF THIS IS NOT OUR IUCV INTERFACE, UNPREDICTABLE
/* RESULTS MAY OCCUR FOR ANOTHER IUCV FACILITY USER.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52432
 AFFECTS PHASE=IUCVFAQS
 ALTER 000816 D70738783878D201 : D2013872A000D707
 ALTER 00081E 3872A000         : 38783878
 RESOLVES 'PROBLEMS WITH IUCV SEVER'
/*
/&
// JOB BF52433
/*
/* THIS PATCH ALLOWS FAQXCONS TO SEND DATA TO A BIM-FAQS/ASO USER
/* EVEN IF THE INITIAL CREATION OF A SCREEN OF DATA FAILS DUE TO
/* NOT BEING ABLE TO ISSUE COMMANDS TO THE HARD COPY FILE SYSTEM
/* TASK.  THIS WAY THE USER WILL STILL BE ABLE TO POSSIBLY ISSUE
/* COMMANDS AND RECEIVE CONSOLE DATA EVEN IF THE SYSTEM IS PARTIALLY
/* IMPAIRED FOR SOME REASON.
/*
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52433
 AFFECTS PHASE=FAQXCONS
 ALTER 000B22 C072C074C076C078 : 947F703194FCA996
 ALTER 000B2A C07A             : 07F5
 ALTER 00188C 947F7031         : 4550C072
 RESOLVES 'ALLOW CONSOLE ACCESS ON ERROR'
/*
/&
// JOB  BF52434
/* CATALOG BF052434.fix TO the VIO PDS
/*
/* This fix corrects a problem with not displaying the entire
/* member name if the type is the full 8 characters.  The MSHP
/* portion also fixes a problem with displaying the correct MSHP
/* control values for the member list display.
/*
/*
/* Step 1:  Catalog the IMOD changes to the VIO PDS file.
/*
/* This job step only catalogs the fix to the VIO PDS.  To activate
/* this and other fixes you must run the BIM$UTFX imod using
/* BIM$RXBA and then execute the generated BASOTEMP.PROC member
/* that is created:
/*
/*      // EXEC BIM$RXBA,PARM='BIM$UTFX S=lib.sublib P=BASO R=V5.2D'
/*      /*
/*
/* where lib.sublib is the location of your BIM-FAQS/ASO library.
/*
/* Since the above procedure creates a .PROC member you must have
/* write access to the BIM-FAQS/ASO library/sublibrary or you will
/* receive an LOPENO error from the BIM$UTFX process.
/*
/* This process can be run multiple times without resulting in
/* any problems or duplication.  Each run will rebuild the PROC
/* with all .fix members found for the requested product and release
/* so that when you execute it all fixes are applied or reapplied.
/* The original PROC's for this release are never modified.
/*
/* Be sure the CAT= below has 'fix' in lowercase...
/*
// OPTION LOG,LOGSRC
/*
/*
// EXEC BIM$PUTL,SIZE=BIM$PUTL,PARM='INSTALL'
PDS=VIO,CAT=BF052434.fix
MEM=FAQMENL3.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E508693828494857E938586A34DA394974F4F7D4B7D4F4FA2A482
A2A3994D508693F393954B896BF1F06BF85D6BF1F65DFF
D9C5D740F1FF
40404040404040404040508693828494857E938586A34DA394974F4F7D4B7D4F4FA2A4
82A2A3994D508693F393954B896BF1F06BF85D6BF1F75DFF
615BFF
MEM=FAQMENL4.SDF PDS=VIO REL=V5.2D TYP=FIX
E2C3C1D540C1D9C77E508693F49485947E938586A34D939485946BF1F65DFF
D9C5D740F1FF
40404040508693F49485947E938586A34D939485946BF1F75DFF
615BFF
E2C3C1D540C1D9C77E4F4040D485948285997A5B508693F49485944040404040404040
404F40E3A897857A5B5040404FE99695857A6F5040404040404F40D38995857A6FFF
D9C5D740F1FF
4F4040D485948285997A5B508693F4948594404040404040404040404FE3A897857A5B
5040404FE99695857A6F5040404040404F40D38995857A6F508693F4938995404F9686
5B508693F4A396A3404AFF
615BFF
E2C3C1D540C1D9C77E4F4040D485948285997A5B508693F49485944040404040404040
404F40E3A897857A5B5040404040404040404040404040404F4040C18484997A6FFF
D9C5D740F1FF
4F4040D485948285997A5B508693F4948594404040404040404040404FE3A897857A5B
5040404040404040404040404040404F4040C18484997A6F508693F4938995404F9686
5B508693F4A396A3404AFF
615BFF
E2C3C1D540C1D9C77E4F4040D485948285997A5B508693F49485944040404040404040
404F40E3A897857A5B5040404040404040404040404040404F4040C18484997A6FFF
D9C5D740F1FF
4F4040D485948285997A5B508693F4948594404040404040404040404FE3A897857A5B
5040404040404040404040404040404F4040C18484997A6F508693F4938995404F9686
5B508693F4A396A3404AFF
615BFF
E2C3C1D540C1D9C77E4F4040D485948285997A5B508693F49485944040404040404040
404F40E3A897857A5B5040404040404040404040404040404F4040C18484997A6FFF
D9C5D740F1FF
4F4040D485948285997A5B508693F4948594404040404040404040404FE3A897857A5B
5040404040404040404040404040404F4040C18484997A6F508693F4938995404F9686
5B508693F4A396A3404AFF
615BFF
./ END
/*
/*
/* Step 2:  Apply the BF52434 patch
/*
/*
/* THIS PATCH FIXES A PROBLEM WITH THE LIBR MEMBER DISPLAY THAT
/* INDICATES A MEMBER IS UNDER MSHP CONTROL WHEN IT IS NOT AND
/* VISA VERSA.
/*
// EXEC MSHP,SIZE=900K
 CORRECT 2885-BF2-00-52D : BF52434
 AFFECTS PHASE=FAOXSFN
 ALTER 00CA3C 4770 : 4780
 RESOLVES 'FIX LIBR MSHP INDICATOR
/*
/&